How to lay carpet on carpet

Carpet - one of the softest and most pleasant to the touch flooring. Its assortment is so large that you may not even know about some varieties. In a word, the manufacturer did everything to please you only! But does everyone know how to properly lay or change it? Especially often the question arises whether it is possible to lay a new roll on an existing layer.

Let's understand this issue together to understand how to properly lay a carpet on a carpet.

What should be the basis

If you decide to put a carpet on top of another floor covering, be it linoleum, parquet or old carpet, then first you need to assess its condition. The base must not be swollen or deformed. In no case should you put the coating if linoleum is in bubbles with air and with tubercles. This will all affect the evenness of the surface.

An excellent option as a basis is linoleum, which is nailed or glued to the floor, that is, it will not move. Linoleum serves as an excellent substrate, but today it is not about him. But anyway the surface must first be prepared, and after that a new floor covering should be laid.

Considering the fact that in most cases the carpet adheres to the surface, it is necessary to take care of sufficient adhesion. For this it is necessary to clean the flooring well and degrease it. The laminate can be thoroughly washed with water, the carpet can be cleaned, and the laminate simply wiped with a damp cloth and give it a little time to dry.

The main thing is that the base is smooth and solid.

Carpeting

The new carpet flooring can be put on absolutely any surface, but it is necessary take into account some features of each of the species.

It is possible to lay material on an old covering. This will be a significant savings in the family budget, despite the fact that it will not affect the appearance.

If you put a new carpet on the old layer, then you can significantly improve sound insulation. Linoleum in this regard is significantly inferior.

Bottom layer requirements

If the carpet has already been laid in your apartment, then there is no need to remove the old layer. The old layer not only does not hurt, but also has a number of advantages. Thanks to him, the following happens:

1. sound insulation improvement;
2. concealment of small surface roughness;
3. muting steps;
4. warming.

It is possible to lay the carpet on the old layer, but this may not be reflected in the best way on the new coating.. And in addition to this, it will add complexity during styling.

IMPORTANT! The old coating should not be damaged, air bubbles, waves and so on.

What will be needed to lay the second layer of carpet

It is very important that the canvas lies flat and there are as few seams as possible. Even better if you succeed make a seamless coating, that is, lay it in a solid piece. And here it’s not even a matter of beauty. Just over time, the edges will begin to rise, and the pile will begin to shag.

Advice! To avoid negative consequences, it is recommended to calculate the required amount of material in advance. And then purchase it with a margin of 30 cm on each side.

Instruments

For installation of flooring It is necessary to purchase special tools: roller and knife.

The knife for the carpet is more like not a familiar tool for all of us, but a miniature sewing machine. It looks like a square with a handle. They pull the handle, and at this time a cut appears on the side.

There are more lightweight options for knives. But they are not quite suitable for beginners, because they need certain skills to adapt to such a device. An ordinary knife in this case is also not suitable, because it is very likely to cut off too much and spoil the material.

Mounting Methods

The most suitable mounting method in this case is either the tension method or gluing carpet with adhesive tape.

Using double-sided tape you can do the job very quickly.

Important! Bonding is carried out using a grid of tape. It consists of 50 * 50 squares.

Keep in mind that such a floor covering will last for several years, after which it will have to be re-glued.

Tension method a more complicated way of laying carpet in living rooms. A large number of special tools are required for its installation. Because of this, its use is disadvantageous for a beginner.

If you decide to dwell on this particular installation method, then it is better to turn to a professional for help.

Tips for laying a carpet on a similar coating

• Lay the carpet under the force of even a novice. Mounting the coating on a double-sided tape will not be difficult even for an inexperienced person.
• But it is not recommended for beginners to lay the carpet by tensioning. Because it is very likely that after some time the flooring will be covered with waves, bubbles and folds.
• With a careful approach to the choice of materials and fasteners, you can achieve a long service life and easy to use floor. Be sure to ask for a quality certificate for the product, because this will save you from acquiring base material.
• If you doubt your abilities, and are not sure that you can put the flooring on your own, we still recommend contacting professionals.