The oven in the gas stove goes out

Modern household appliances are presented in a wide range, which greatly facilitates kitchen cares. This includes a gas stove, which is additionally equipped with an oven. Often, housewives have to deal with a common problem - the oven suddenly goes out. In some cases, the problem can be solved independently without involving specialists.

Most housewives still opted for a gas oven when selecting kitchen appliances. They are distinguished by wide functionality, precise settings and simple operating conditions. Despite all the amenities, there may be a problem with this device - the oven goes out after a short period of inclusion.

There may be several reasons for this:

• lack of oxygen;
• gas supply valve is shut off;
• delayed heating of the flame sensor;
• pressure drop in the pipeline;
• burner contamination;
• Incorrect installation of the burner after cleaning.

These factors can be solved independently. The work process does not require specialized skills, and also does not take much time.

Independent solution to the problem:

1. Insufficient oxygen supply may cause the oven to go dark. In such situations, experts recommend lighting the oven with the door open.
2. Inattention, you can forget to turn the valve to open access to the incoming gas. It is recommended that you check whether the turntable is open to supply gas to the stove.
3. For safety reasons, gas stoves with integrated ovens are equipped with additional flame detectors. This device detects the absence of temperature increase and blocks the flow of gas. In such situations, you should hold the power knob a little longer than usual. It will be useful to turn on the oven at maximum temperature. This step will help speed up the warm-up. This situation is mainly faced by residents whose homes are equipped with bottled gas. Due to the low intensity, the sensor does not heat up, which leads to its shutdown. To solve the problem, it is necessary to change the cylinder to full or to refuel.
4. In the process of preparing various dishes, droplets of fat and small particles of food fall into the burner openings, which gradually leads to its failure. This is easily noticeable visually: the burner ignites unevenly, with frequent interruptions, in some areas a complete absence of fire is possible. In this case, it is necessary to carefully remove the burner and thoroughly clean its surface from the resulting deposits.
5. After cleaning and washing, there is a risk that the burner cannot be inserted into the cavity correctly. The signs here are similar to the previous factor: uneven supply of flame or its complete absence. If this is the case, it is necessary to remove the burner from the installation area and insert it correctly into the cavity.

Important: re-ignition must be carried out after one minute. This will avoid the risk of explosion.

The reasons for the development of malfunctions can be not only improperly installed burners or uneven gas supply. Defects in the internal structure of the oven itself are also possible.

Possible causes of failure:

• instant extinction of the flame when lowering the handle or button indicates a malfunction of the electromagnetic valve or thermocouple;
• failure of the thermostat. This is evidenced by the periodic extinction of the flame after its ignition;
• breakage of the adjustment knob causes the flame to die out instantly when it is lowered;
• when the rotation mechanism is clogged or the lubricant dries, the handle does not turn well. Because of this, the burner does not light up at full power and the flame sensor does not heat up.

With some skills, current problems can be solved independently. If they are absent, it is necessary to seek help from a service center by specialists for repair work.

1. If the control system fails, it is necessary to replace its components: thermocouples or valves. In some situations, a complete replacement of the entire system is required.
2. If the thermostat malfunctions, the heating level decreases. For stable operation, its calibration and timely diagnosis are necessary. In case of breakdown - replacement.
3. During prolonged use, the handles fail. In this case, its replacement is necessary. When buying, pay special attention to the identity of the new part. Replacement is easy to carry out on your own: carefully pull the old handle toward you, it can be easily removed. We fix a new part, check the oven.
4. In most cases, to eliminate the last problem, it is necessary to disassemble the gas valve, carry out its full cleaning, lubricate with special grease. In some situations, parts may need to be changed. In this case, it is better to contact professionals.

Gas stoves with built-in ovens are deservedly in great demand among housewives. As with any appliance, the oven or stove may cause malfunctions due to prolonged use. Knowing the source of the problem and applying several technical skills, you can fix the breakdown factor yourself. With certain knowledge, the technological process will not take a lot of money and personal time.