Does the convector dry air: choosing an electric non-burning convector

The sensations of dryness can be especially strongly perceived during the operation of some types of heating devices, and to a greater extent this applies to devices with open high-temperature heating elements. During their operation, dust particles located on the device itself begin to burn, causing the appearance of a characteristic unpleasant odor and a feeling of heaviness of air. And the smaller the area of the room and the higher the speed of its heating, the more dryness is felt.

Does the convector dry the air

The burning of oxygen arising from the operation of heaters is a common misconception. This is due to the subjective sensations that arise during the operation of heating devices. Simple heating, without the use of specially designed installations used for construction work, is not able to remove water particles from the atmosphere. With an increase in temperature in an enclosed space, a relative decrease in relative humidity naturally occurs, causing unpleasant sensations of moisture deficiency and lack of oxygen, however, the absolute humidity in the room remains the same.

ATTENTION! Convector heaters currently manufactured are free from the drawbacks of air drying, since there is no fan in them - the heated oxygen coming out of them naturally dissipates, without affecting the distribution of moisture in the room. And due to the built-in flat low-temperature heating element, the possibility of burning dust particles is completely eliminated and a pleasant feeling of freshness and purity of air is created.

Characteristics of a convector that does not dry air

When choosing a convector type heater, you should pay attention to the following characteristics:

The size of the heating element. The larger its area, the more efficient is the heating of the room, and due to the low temperature (50-60 degrees on average) - there is no effect on air humidity, and the probability of burning dust is completely eliminated.
Type of heating element. When choosing a convector, preference should be given to modern constructions of a new generation equipped with a monolithic heating element, which allows you to effectively heat the room, while minimizing the surface temperature of the device.
In the most advanced models, there may be an air ionizer that absorbs dust. The anions produced when it is turned on purify oxygen, making it more useful.
Some models are equipped with filters to prevent dust from entering the device. It is also possible to choose a convector with a built-in humidifier.

How to choose the right convector, non-burning air

When choosing a convector type heater, its characteristics should be considered:

Power consumption. The choice is made taking into account the size of the room in which the device is planned to be installed.
A heating element. In convection heaters, elements of the tape type, PETN or monolithic are possible. In the best way in providing the room with warm and high-quality oxygen, a monolithic heating element has proved itself.
Instrument installation options. There are two options for installing convectors - floor or wall. If the heater is planned to be transferred from one room to another, then you should choose the floor option, which has supporting legs with wheels. Possible options for supporting legs and without wheels.
Thermostat. The presence of a thermostat makes it possible to regulate the intensity of heating, to reduce and add power to create the optimum temperature in the room. For greater convenience, it is recommended to give preference to the electronic switch.
The presence of a thermostat will maintain the set temperature.
Dimensions of the device. The air circulation speed depends on the height of the device - the lower the convector itself, the higher the air flow rate, respectively, the room will warm up faster. Long baseboard-type convectors can significantly warm the lower part of the room.
Security. An additional bonus of the low temperature of the heating element can be considered the safety of the device. Indeed, due to the fact that the heating of the case occurs up to a maximum of 60 degrees, there is no possibility of getting burned. It is also possible to choose a device with rollover protection and a housing that has smooth outlines without sharp corners. Such a convector will be the best choice if there are small children in the house.
The built-in timer allows you to set a specific time for turning on and off the device.

Having left the choice on a convector type heater, it is worth giving preference to models from well-established manufacturing companies. The quality of the materials used in the manufacture of the housing determines the absence of an unpleasant odor during operation.

IMPORTANT! When the device is turned on, moving oxygen will move dust particles with it, which will settle between the convector plates - in this case, you will have to forget about fresh air.

Maintaining cleanliness in the room with the help of regular wet cleaning and taking care of the device itself, timely removing the settled dust from it with a vacuum cleaner, it is possible to create an optimal microclimate in the room with a comfortable and stable temperature.